Steel Knob Spindles - 20 TPI
3/8-20 Threads per inch: for Corbin/Russwin, Yale, Marks, Norwalk, National, Baldwin, Progressive, & most vintage door knobs
|
#44-20-3-1/2 Straight spindle, 9/32" square, 20 TPI, 3-1/2" long
#44-20-4 Straight spindle, 9/32" square, 20 TPI, 4" long
#44-20-5 Straight spindle, 9/32" square, 20 TPI, 5" long
#44-20-6 Straight spindle, 9/32" square, 20 TPI, 6" long
|
#45-20-R - Swivel spindle, 9/32" square, 4-3/4" long, threaded 3/8-20, with two removable centers
|
#45-20-S - Swivel spindle, 9/32" square, 4-3/4" long, threaded 3/8-20, with two 3/8" solid centers
|
#45-20-P - Swivel spindle, 9/32" square, 4-3/4" long, threaded 3/8-20, with stop pin. Replaces Russwin #21
|
#45-20 - Swivel spindle, 9/32" square, 4-3/4" long, threaded 3/8-20 both ends,
|
#45-20-SPH - Swivel spindle, 9/32" square, 4-3/4" long, threaded 3/8-20 both ends. With two 3/8" solid centers and 3 pin holes
|
#45-20-1/2SPH - Swivel spindle, 9/32" square, 4-3/4" long, threaded 3/8-20 both ends, with one 3/8" solid center and 3 pin holes
|
#45-20-RPH - Swivel spindle, 9/32" square, 4-3/4" long, threaded 3/8-20 both ends, with two removable centers and 3 pin holes
|
#45-20-C - Swivel spindle, 9/32" square, 4-3/4" long, threaded 3/8-20 both ends, with one 3/8" solid center. Replaces Russwin #22
|
#45-20-1174 - Swivel spindle, 9/32" square, 5-3/8" long, threaded 3/8-20 on 3" side, five 1/8" pin holes on 2-3/8" side. Replaces Yale #1174-1/2
|
#45-20-32 - Swivel spindle, 9/32" square, 4-3/4" long, threaded 3/8-20 one side with one 3/8" solid center and 3 pin holes on unthreaded side. Replaces Russwin #32
|
#44-YA1170 - Straight spindle, 9/32" square, 4-1/2" long, threaded 3/8-20 one side, 5 pins holes on unthreaded side. Replaces Yale #YA1170 1/2 and Russwin #30
|
#45-20-N - Swivel spindle, 9/32" square, 4-3/4" long, threaded 3/8-20 both ends, With stop notches on one side.
|
#45-20-N6 - Swivel spindle, 9/32" square, 6" long, threaded 3/8-20 both ends, With stop notches on one side.
|
#45-20-P6 - Swivel spindle, 9/32" square, 6" long, threaded 3/8-20 both ends, With stop pin on one side.
|
#45-20-P3 - Swivel spindle, 9/32" square, 3-1/2" long, threaded 3/8-20 both ends, With stop pin on one side.
|
#45-20-PRV - Swivel spindle, 5/16" square, 3-1/2" long. Threaded 3/8-20 both ends with stop pin on one side.
|
#46-20-2-5/8 - Sectional spindle, 9/32" square, 2-5/8" long, threaded 3/8-20
|
#46-20-3-1/2 - Sectional spindle, 9/32" square, 3-1/2" long, threaded 3/8-20
|
#33BP - Closet spindle. Turn with 3-1/4" spindle, threaded 3/8-20. Turn is Zinc die casting, brass plated.
Packed 12 per box
|
Dummy spindle with 1-7/16" mounting disc
Threaded 3/8-20
#112-1 1" long spindle
#112-1-1/2 1-1/2" spindle
Packed 12 per box
|
#REM - Replacement removable centers for 9/32" square swivel spindles
Packed 144 per bag
|
Steel Spindles with 10-24 Tapped Holes
Threaded 3/8-20 TPI
|
|
10-24 Set screws for below spindles. Traditionally used with vintage knobs.
Packed 12 per bag
|
|
Knob Washers - Used to take up any space when using vintage knobs on the below listed spindles. 5/8" OD, 25/64" ID, 1/32" thick. Packed 100 per bag
|
|
#44-4TP Straight spindle, 9/32" square, 4" long, no thread, tapped holes both ends
#44-5TP Straight spindle, 9/32" square, 5" long, no thread, tapped holes both ends
#44-6TP Straight spindle, 9/32" square, 6" long, no thread, tapped holes both ends
|
#44-20-4TP Straight spindle, 9/32" square, 4" long, 20 TPI
, tapped holes both ends
#44-20-5TP Straight spindle, 9/32" square, 5" long, 20 TPI
, tapped holes both ends
#44-20-6TP Straight spindle, 9/32" square, 6" long, 20 TPI
, tapped holes both ends
|
Swivel spindle, 9/32" square, 4-3/4" long, threaded 3/8-20, with two removable centers
, tapped holes both ends
|
Swivel spindle, 9/32" square, 6" long, threaded 3/8-20, with two removable centers
, tapped holes both ends
|
Swivel spindle, 9/32" square, 4-3/4" long, threaded 3/8-20, with two 3/8" solid centers
, tapped holes both ends
|
Swivel spindle, 9/32" square, 4-3/4" long, threaded 3/8-20 both ends, With stop notches on one side
, tapped holes both ends
|
SPINDLE ASSORTMENT KITS
Kit contains 6 each of the most popular spindles, for a total per kit of 36 pieces
#20 Spindle Kit for all 20 TPI knobs contains:
6 ea - #45-20-S
6 ea - #45-20-P
6 ea - #44-20-46 ea - #44-20-4TP
6 ea - #46-20-2-5/8
6 ea - #45-20-RTP
#1618 Spindle Kit for Sargent and Lockwood 18 TPI knobs contains:
6 ea - #44-16-5
6 ea - #45-16-S
6 ea - #46-16
6 ea - #44-18-4 1/2
6 ea - #45-18-S
6 ea - #46-18-2 5/8
|
63 Brightside Ave. East Northport, NY 11731 631-757-8866
|
|
|
